Fanvil Linkvil W712 - RoIP Gateway

RoIP Gateway with Built in Radio and SIP Modules, UHF - 400~470MHz, SIP Protocol, HD Audio, 2 SIP Lines, Desktop and Wall Mountable

The Fanvil Linkvil W712 is a RoIP Gateway with built in Radio and SIP Modules, that enable interconnection between Analogue and Digital Radios and SIP Communication Devices.

Small, portable and powerful, the W712 Gateway is compatible with mainstream Analogue / DMR II Digital Two Way Radios and is easy to deploy and easy to manage.

The W712 helps to build am interconnected communication system without having to change the existing Analogue and Digital communication systems. Its suitable for internal communication in scenarios including Community Security, Industrial Parks, Supermarkets and Hospitality.

The W712 RoIP Gateway integrates the radio module in UHF 400-470 MHz and adopts the SIP standard protocol. It is compatible with most mainstream IP PBX's. easily realising the interconnection between Analogue / DMR II digital intercom and SIP communication devices.

With a built in wireless radio module, the W712 RoIP Gateway is small and portable, and is the similar size as a router. The W712 can be deployed and managed through the web page for easy management.

Equipped with a USB interface and TF card interface that supports the capacity of up to 128G, the W712 RoIP Gateway can be used to record calls.

Supports HD Audio with G.722 and Opus, Supports VAD (Voice Activity Detection.

Interconnection between Analogue, Digital and SIP communication devices.

Unified Central Management of control room for trans-regional devices.

Reduce the management cost and improve the dispatching efficiency.

• Integrate 400~470 MHz Radio Modules to Connect the Analogue / DMR II Digital Radios
• Compatible with SIP Protocol to Connect SIP Communication Devices
• High Compatibility with Motorola, Hytera and Other Mainstream Analogue / Digital Radios
• Supports HD Audio with G.722 and Opus
• Supports USB 2.0 Interface and TF Card Interface for Data Storage or Offline Upgrade
• Supports Call Recording and Call Logs of Two Way Radios and SIP Phones
• Dual Megabit Ethernet for Network Transmission
• Supports the Power Supply via DC 12V PSU and PoE (at)
• Supports the Web Management for Devices
• Supports Desktop and Wal Mounted Installation

• Supports 1 Connection of Analogue / DMR II Digital Radio's, 1 Connection of SIP Call
• Supports Call Recording, Supports SIP Hotspot
• Supports Traditional Analogue / Digital Intercom and SIP Products (Frequency Band - 400-470MHz)

• Supports Standard SIP Protocol
• Supports HD Audio Voice Activity Detection with Noise Reduction
• Narrowband Codec - G.711A/U, G.729A/B, iLBC, G.723.1, G.726-32J
• Wideband Codec - G.722, Opus

• Radio Frequency - UHF - 400-470MHz
• Communication Distance - 1~3km in Urban Open Area's (Depending on the Actual Environment)

• Auto Answering, Speed Dials
• Network Time Synchronisation
• Dynamic Multicast Function
• Blocked Call List
• Call Logs - 600 for SIP Phones / Radios
• Action URL / URI

• Dual 10/100 Mbps Ethernet
• IP Mode - IPv4/IPv6/IPv4&IPv6
• IP Configuration - Static IP / DHCP / PPPoE
• VPN: L2TP / OpenVPN
• VLAN

• Dual 10/100 Mbps Ethernet
• IP Mode - IPv4 / IPv6 / IPv4 & IPv6
• IP Configuration - Static IP / DHCP / PPPoE
• VPN - L2TP / OpenVPN
• VLAN
• SIP v1 (RFC2543), v2 (RFC3261) over UDP/TCP/TLS
• RTP/RTCP/SRTP
• STUN, DHCP
• IPv6, PPPoE
• L2TP, SNTP, OpenVPN
• FTP / TFTP, HTTP / HTTPS, TR-069

• Fanvil Linkvil W712 RoIP Gateway
• Antenna, Screws, Screw Fixing Seal
• Quick Installation Guide