3M™ Peltor™ WS Litecom Plus PMR446 Bluetooth Helmet Headset

The 3M™ PELTOR™ WS™ LiteCom Plus Helmet / Hardhat Headset is a Hearing Protector with built in Analog Two Way Communication Radio, a Level Dependent Function for Ambient Listening, Bluetooth® Multipoint Connectivity and External Connection Jack

About the Headset

The 3M™ PELTOR™ WS™ LiteCom Plus Helmet / Hardhat Headset has been designed with the new Bluetooth WS6 chip - providing hearing protection with an integrated analog two way radio enabling Headset to Headset communication, it can be integrated with similar Professional Radio Communication Systems, and can be used on the PMR446 frequency.

The Headset includes Bluetooth® enabled multipoint connectivity for simultaneous, seamless connection. the level dependent function helps you to hear important sounds from the surroundings and enables you to communicate with people standing close by without compromising your hearing protection.

Attaches to a Helmet

The Hardhat Headset attaches to a Hardhat or Helmet, and offers comfortable wear during prolonged use.

Hearing Protection

The noise attenuating Headset helps provide hearing protection in environments with potentially hazardous noise.

External Connection Jack

The external connection jack provides the possibility to connect an external communication device via a cable.

Level Dependent Technology

Microphones for ambient listening, helps improve situational awareness and communication.

Bluetooth® Connectivity

Multipoint Connectivity for simultaneous, seamless connection to up to two external devices using Bluetooth® technology.

Voice Operated Transmission

Voice Operated Transmission (VOX) for handsfree operation in high noise environments.

Noise Cancelling Waterproof Speech Microphone

The Noise Cancelling Microphone helps provide communication in noisy and demanding environments.

Built In Analog Two Way Communication Radio

• Headset to Headset Communication with the Ability to be Integrated with Similar Professional Radio Communication Systems using 16 channels - PMR446 MHz
• Analog Radio Selective Squelch Function with CTCSS Tones, Allows Multiple users to Work on the Same Channel without having to Listen to Each Others Coversations

Long Range - Low Power

• Range with Maximum Output Power is 2km Outdoors - Depending on the Actual Conditions
• Operating Time is up to 18 Hours

Easy to Use

• Five Conveniently Positioned Function Keys and Voice Guided Menus with Multiple Language Selection to Handle all Modes and Settings
• Push to Listen Quick Activation of Level Depedent Function - Level Dependent Function helps Important Sounds to be Heard from the Surroundings and Enables Communication with People Standing Close by in a Noisy Environment, without Compromising your Hearing Protection

Technical Specifications

• Weight - Approx 532g
• Built in Two Way Radio - Frequency Range - PMR446 MHz
• Operation Mode - Simplex
• Channels  - 16 PMR446 Analog
• Channel Separation - 12.5 KHz
• Modulation - Analog FM
• Microphone Type - Dynamic (MT73)
• Receiver Sensibility - Typical -120 dBm
• Selective Squelch - Programmable - Supports CTCSS and DCS
• Output Power - PMR - Hi - 150mW, Lo - 25mW
• Range - Outdoors - Up to 2km Depending on Conditions
• Included Battery - ACK081
• Charging Time - Approx - 4 Hours
• Capacity - 3.7V, 1800mA, 6,7 Wh
• Operating Time - Up to 18 Hours (90 Hours Standby / 5tx 5rx)
• IP68 Ingress Protection Rating - Protects Against Dust and Long Term Immersion up to a Specified Pressure

Package Contents

• 1 x 3M™ Peltor™ WS™ LiteCom Plus Helmet Headset
• 1 x Battery (ACK081)
• 1 x Power Supply (FRO8)
• 1 x Cable AL2AI for ACK081
• 1 x Hygiene Kit HY83
• 1 x Mic Tape HYM1000-100
• 1 x User Manual