2N IP Verso Surface Installation Frame - 1 Module

The 2N IP Verso intercoms and 2N Access Unit 2.0 readers are modular. Each function, such as the camera unit, keypad or card reader, is a separate module, and every module sits in a frame. The frame holds the module in place and gives the installation its finished edge.

2N makes two types of frame. A flush frame needs a flush box built into the wall, so the unit sits level with the wall surface. This surface frame fixes straight onto the wall, so it can be fitted without cutting into the wall. 2N states that no other accessories are needed for a surface installation.

When to Choose the Surface Frame

The 1-module frame is used when only one module is mounted at an entrance, or when another module is added to an existing installation. Choose the surface version where a recess in the wall is difficult or not allowed:

• Solid Walls - Concrete, stone or brick walls where cutting a recess for a flush box would take extra work
• Glass Entrances and Cladding - Fitted together with the 2N backplate (9155061)
• Listed or Rented Buildings - Where the wall cannot be chased or cut
• Adding to an Existing Entrance - A new module, such as a keypad or reader, fitted in its own frame next to the unit already in place

Choosing Black or Nickel

Nickel is a metallic silver finish, and black suits dark doors, frames and cladding. Order the frame in the same finish as your IP Verso or Access Unit 2.0 modules, so the whole unit is one colour. When adding a module to an existing entrance, match the finish of the frame already installed.

Weight and Dimensions

• Weight - 0.5kg Approximately
• Dimensions - 107mm x 130mm x 28mm (W x H x D)

Package Contents

• 2N IP Verso Surface Installation Frame - 1 Module - Black or Nickel (To be Selected at Checkout)