The Fanvil PA2 is a SIP Video Intercom and Paging Device for Industry Application. It will fit the needs of many industries from Offices, Hotels, Restaurants to Large and Small Shops as well as Universities and Aiports are some of the many Target Groups. The media stream transmission adopts standard IP/RTP/RTSP Protocol. It inherits the advantages of the stability and the sound quality of FANVIL VOIP Phones. Its perfectly compatible with all the current SIP IPPBX/IMS Platforms such as Asterix, Broadsoft, 3CX, Elastix and more.
Its various Functions and Interfaces such as Intercom, Broadcast, Video, Security and Recording adapt to different application environments, the PA2 is ideal for anyone looking to implement an Intercom or Paging Solution.
The DIY Intercom Solution
The PA2 has a Variety of Interfaces Which Enable Users to Quickly Configure Intercom & Paging Solutions to Suit the Requirements of a Wide Range of Scenarios
HD Video Calls
Supports Plug and Play for SIP-HD Video Calls by Using the Special Camera Module
Maximum 3W Audio Output
With 10W, 20W and 30W Audio Amplification Output Modes, the PA2 is Able to Meet Different Needs in Various Situations
Video Linkage
Support Video Linkage with HIKVISION and DAHUA IP Cameras to Make Video Calls
High Reliablilty
With 15KV High Electrostatic Protection and Double Watch Dog Design, the PA2 can Work Perfectly in Extreme Weather Conditions and Suit Industrial Applications
HD Intercom and Paging
Supports 7K Bandwidth High Quality HD Voice on Two Way Intercom and Broadcast
Dual Stream
The PA2 is Able to Stream High Quality Video to an NVR Device for Recording/Playback Whilst Monitoring with Bandwidth Efficiency on Devices, Including Video IP Phones
Easy Integration
RTSP Stream for Monitoring Within Existing Systems on your Network, Outside your Phone System
Fanvil PA2 SIP Paging Gateway Key Features & Highlights
Small and Exquisite, Can be Embedded in the Internal Installation
Emergency Call Button Interface, Active Call
Interact with IPC Camera, You Can Make a Video Phone Call
Two SIP Lines, Supporting SIP 2.0 (RFC3261) and Related RFC
Supports Two Lines RTSP
Voice Broadcast IP Address
Button or Remote Volume Adjustment
Switch Signal Input and Output
Talkback Recording Output
Hands Free Talking
Default Auto Answer
Dynamic Multicast Function
Supports DC or PoE Power Supply
Support for Function Key Interface
Support Monophonic Active Speakers
Network Time Synchronisation
Action URL / Active URI Remote Control
Audio
Narrow Band Speech Coding - G.711a / u, G.723.1, G.726-32K, G.729AB
Broadband Speech Coding - G.722
Half Duplex Echo Cancellation (AEC)
DTMF - In-Band, Out-of-Band DTMF (RFC2833) / SIP Info
Networking Protocols
Supports PoE (802.3af)
Primary and Secondary DNS Servers are Supported
Support VLAN
Supports SNTP Client
Support VPN L2TP / PPTP / IPSec
Supports SRTP
Support for HTTP / HTTPS Web Pages
Support QoS - 802.1p / q, DSCP
Support MD5 Authentication
Supports Web Filter
DHCP / Static / PPPoE
STUN
Physical Specifications
2 x RJ45 Interface - Yellow - WAN Port 10 / 100M Adaptive, Support PoE, PoE - 802.3af (Class 3 -6.49 ~12.95W), Black - LAN Port (Only Connected to the Original Camera, Cable - Super Five Lines or Better
1 Way Microphone Input Interface - Recommendation - Use an Electret Condenser Microphone Sensitivity: -38dB, Impedance 2.2 K Ohm Bias Voltage 2.2V Interface:Pluggable Terminal Block
1 Short Circuit Input and Output Interface (Built-in Relay) - Relay - MAX DC30V / 1A, AC125V / 0.5A, Interface - Pluggable Terminal Block
2 Parallel Power Input Interface - 12V-24V / 2A DC 1 Road for the 5.5mm DC Power Seat 1 Road Way 2Pin Pluggable Terminal Block
Standby Power Consumption - DC12V 1.32W / POE 1.78W
All information is provided for reference only. If you are unsure about any of the features listed, please check the manufacturer's official information.