Burnside CellRoute-GSM AC Fixed Wireless Terminal

CellRoute-AC has been developed to enable major network operators to provide Fixed Wireless Access to emerging markets around the world. In countries where having a fixed line is either an expensive option or network infrastructure does not exist, the CellRoute can provide fixed line functionality over the GSM network. CellRoute-AC provides users with high quality voice using EFR (Enhanced Full Rate) codecs. The CellRoute-AC can be self-installed by the end user, making the provisioning cycle simple and reducing costs for the network operator.

Features

• High Ringer Equivalence POTS Interface
• Supports up to 4 additional extensions
• Highly compatible POTS & PABX interface
• Bellcore Caller Line ID Presentation
• GSM Network features supported (subject to network support)
• Selectable Dial tone and Ring cadences
• SIM lock
• Network lock
• Remote Software Upgrades
• Off-hook Howler
• External Antenna facility

Telephony Interface

• Call Control: DTMF
• Line Voltage: 48V on hook
• Loop Current: 40mA off hook
• Line impedance: 600-ohm complex
• Ring Voltage: 70Vrms
• Ring Load: REN 4
• CLIP: Bellcore FSK

GSM Interface

• GSM Module: Cinterion MC55i
• Bands: GSM 850 / 900 / 1800 / 1900 MHz GSM Phase 2/2+
• Transmit Power: Class 4 (2W) for EGSM 850MHz, Class 4 (2W) for E-GSM 900MHz, Class 1 (1W) for GSM 1800MHz, Class 1 (1W) for GSM 1900MHz
• Speech Codecs Half Rate (ETS 06.20), Full Rate (ETS 06.10), Enhanced Full Rate (ETS 06.50 / 06.60 / 06.80), Adaptive multi-rate (AMR)
• SIM Card: 3V
• Integral Omni directional Antenna with SMA connector for external antenna option

Approvals

• CE Certification to R & TTE directive 1999/S/SEC
• GSM Certifications:ETS 300 607-1 Digital Cellular Telecommunications system, EN 301 419-1 Global System for Mobile communication, ETS 300 342-1 Radio Equipment and Systems

Power Supply

• Primary: 110-240Vac @ 47-63Hz

Physical Specification

• Height: 150 mm
• Width: 122 mm
• Depth: 42 mm
• Weight: 460g