2N EasyGate IP GSM Gateway - 2G / 3G / 4G-LTE / VoIP

2N® EasyGate IP represents a new generation of analogue GSM/UMTS/VoLTE/LTE gateways. It works as a replacement of traditional fixed lines based on outdated analogue technology. This gateway embodies 2N's long-term experience in the lift and telecommunication field, and it fits perfectly in a system of emergency communication in the elevator industry.

Why Move to 4G?

A lot of essential systems deployed in the elevator industry use mobile networks for connectivity of various technological devices. Some of the biggest mobile carriers have already revealed their plans and time frame of a complete transition to the newer 4G technology. This is going to be a major technological change! Is your infrastructure prepared for such a significant change? What will happen once 2G and 3G networks shut down? The end of 2G and 3G networks is approaching. Transition seamlessly to modern 4G with the 2N®EasyGate IP. Connect an analogue lift communicator to the gateway. This will ensure voice or data (VoIP) communication via a mobile network with an operations centre. If you are using an old mobile network for emergency communication, you can continue to do so. When you’re ready to transition to 4G, all you’ll need is a single click in settings. The gateway also supports VoIP (SIP) technology, which is the only technology to guarantee reliable transmission of a DTMF signal.

What will be your cost and who can help you to get ready? 2N® EasyGate IP is one of the first VoIP ready 4G gateways on the market! With this gateway, you can easily enter the world of IP technology and take a step to future proof your elevator solution. 2N® EasyGate IP works as a replacement of traditional fixed lines based on outdated analogue technology.

Features and Benefits:

2G, 3G and 4G Support

The gateway supports 2G, 3G and 4G networks with mainly VoIP. Install the Gateway and continue using the old network. When the time comes you can switch to 4G.

VoIP is the Future

Change all your analogue devices for devices that support VoIP. Without a single change to the hardware in the cabin, you can save on costs and enjoy crystal clear calls.

Backup Operation Using Battery Power

The 2N® EasyGate IP works if there is a power cut. The backup battery can keep the gateway working. Users in the lift can always call for help and you will be in compliance with the legal standards.

Remote Administration and Monitoring

With the forthcoming 2N® Elevator Centre cloud service, you will save on costs for call outs for technicians. Look forward to the securest cloud solution on the lifys communication market.

Reliable Transmission of DTMF

2G, 3G and VoLTE frequently distort the DTMF signal. Only VoIP technology using a SIP protocol guaranteed reliable transmission of DTMF, which is essential for identification of the lift.

For Use in any Lift Shaft

A sturdy cover, operating temperature of up to 85°C, and IP43 protection against sprayed water. All this guarantees that the Gateway can easily withstand adverse conditions in any lift shaft.

Configuration in 2 Minutes

Any technician can easily set up the Gateway, even without special expertise. Configuration is automated and takes no more than 2 minutes.

Technical Specifications:

Cellular Network

• EU (EC21-E) - B1/B3/B5/B7/B8/B20
• AU (EC21-AU) - B2/B4/B5/B7/B8/B28/B40

UMTS/WCDMA Bands

• EU (EC21-E) - 850/900/2100 MHz
• AU (EC21-AU) - 850/900/1900/2100 MHz

GSM Bands

• EU (EC21-E) - EGSM 900 MHz, GSM 1800 MHz
• AU (EC21-AU) - EGSM 850/900 MHz, GSM 1800/1900 MHz

SIM Cards

• 2 Slots, both Support 3 V and 1.8 V SIM Cards

VoIP:

• Protocols - SIP (RFC3261) over UDP, SIPs, SRTP
• DTMF - a) In-band - Analogy of Traditional DTMF, where Tones are Merged with Speech into Single Voice Channel, b) SIP INFO (RFC 2976) - DTMF Signals are Sent Separately in the SIP Message Body

Antenna

• Connector Type - SMA
• Impedance - 50 Ohms

Line Interface

• FXS with Screw Terminal Blocks

Power Source

• Power Adapter - 12 V / 1 A DC Adapter Included, Option to Connect an External 9 to 30 V DC Power Source
• Backup Power - 4 x AA Batteries, Constantly Monitored

Configuration and Upgrade

• Local - wen UI over USB
• Cloud - 2N® Elevator Centre

Dimensions

• 195mm x 119mm x 61mm

Weight

• 600g

IP Protection

• IP43

Status LED's

• Power, Cellular Network, FXS Line, Data, Signal Strength