Easy Setup The snom M700 base station is ideal for companies requiring wireless coverage across several floors or throughout large buildings. Setup is easy and intuitive thanks to the integrated installation mode on the snom M65 handsets.
Seamless handover snom’s multicell DECT solution links multiple M700 base stations together, forming a seamless network to allow free movement between base stations. Initiated calls continue uninterrupted while moving from one station to the next. The multicell solution also supports the snom M5 repeaters with DECT encryption to further increase reception range and to bridge gaps between base stations.
Scalability The multicell solution can be easily scaled and expanded up to a maximum of 40 M700 base stations, 200 handsets in the same network. Base stations synchronize and install themselves; expensive additional controller hardware is not necessary.
With the M700 multicell system in your office, the connected snom M65 handsets enjoy many phone system features such as direct search in the corporate directory and HD audio.
Security Wireless security is ensured by DECT encryption, while TLS and SRTP ensure secure SIP communication. And as an added value, you do not have to pay for licenses for the included audio codecs, channels and other features. Based on snom provisioning, the system is interoperable with all major VoIP systems such as Broadsoft and Asterisk.
DECT
Frequency bands:
1880-1900 MHz (EU)
1910-1930 MHz (Latin America)
1920-1930 MHz (US)
Output power: EU < 250 mW, USA < 140 mW
Protocols: GAP DECT, DECT 6.0, CAT-iq1.0 (wideband)
Four power levels: 14, 17, 20, 24 dBm
Seamless handover using connection handover
Wideband voice
Authentication/encryption of base and handset
Range
Indoors: Up to 50 meters
Outdoors: Up to 300 meters (for indoor use only)
Multicell System
Up to 200 parallel calls in 40-base system
Up to 200 registered handsets in the same network in multi cell setup
Up to 30 handsets per base station in single cell setup
Up to 8 narrowband or 4 wideband calls per base station in multi cell setup
Up to 10 narrowband or 5 wideband calls per base station in single cell setup
Common phonebook with up to 200 entries
List of registered handsets
Audio, Codecs
G.722 (5 channels; 4 in multi cell operation)
G.711 A-law, ?-law,
G.726 (10 channels; 8 in multi cell operation)
Codec negotiation, codec switching
User Interfaces
LED status indication, multicolor
Reset key
Web interface
Installation Positioning:
Floor or desktop (footstand included)
Wall mounting
Ceiling mounting(4)
Remote software updates via HTTP/ HTTPS/TFTP
Automatic loading of settings via HTTP/ HTTPS/TFTP
Completely configurable through Web interface
Static IP, DHCP support
NTP (Network Time Protocol)
Secure provisioning and authentication with Mutual TLS through individual certificate issued by snom CA
Hardware Specifications
Weight: approx. 320g
Dimensions: approx. (mm) 227x279x39 (LxWxD)
Antenna diversity (two internal omni-directional antennas for better transmission and reception)
Power: Power over Ethernet (PoE) IEEE802.3af Class 2. If PoE is not available, a PoE injector can be used (not included).
Ethernet connector: RJ 45
LAN interface: 10/100 BASE-T IEEE 802.3
Colour: black
Standards Conformance
EN 301406 (TBR6)
EN 60950 - 1 (Safety)
IEC60950 -1
CSA c-CSA-us / UL60950 - 1
EN 301489 (EMC, ESD)
RF (EMF, SAR)
FCC part 15D, conducted & radiated
FCC part 15B
RSS213
Supported SIP Protocols
RFC 3261 SIP 2.0 compliant
SIPS Secure SIP
SRTP Limits the number of active calls per base to 4 when packet authentication is enabled
All information is provided for reference only. If you are unsure about any of the features listed, please check the manufacturer's official information.